Posts for category: Dental Procedures
A traditional root canal procedure can be a “life-saver” for a decayed or injured tooth. But while it’s usually the best course for a damaged adult tooth, variations of the procedure are advisable for a new permanent tooth in a child or young adolescent.
This is because the inner pulp, the focus of the treatment, plays an important role in a young tooth’s development. When it first erupts a tooth’s dentin layer, the living tissue that makes up most of the body and roots of the tooth, hasn’t fully formed. The pulp increases the dentin layer over time in conjunction with jaw development.
Because a full root canal treatment removes all of the pulp tissue, it could interrupt any remaining dentin development in a young tooth. This could lead to poorly-formed roots and a less healthy tooth. For an immature permanent tooth, then, we would use variations of a root canal treatment depending on the nature and extent of the injury, the patient’s overall health and medications they may be taking.
Our main objective is to expose or remove as little of the pulp tissue as possible when treating the tooth. If the pulp hasn’t been exposed by the decay or injury, we may only need to remove the softened decayed or injured dentin while leaving harder dentin nearer the pulp intact. If, however, the pulp has become partially exposed by disease or injury, we would then perform a pulpotomy in which we remove only the exposed tissue and then place calcium hydroxide or mineral trioxide aggregate (MTA) to stimulate dentin growth that will eventually patch the exposure site.
In cases where decay or injury has rendered an immature tooth’s pulp tissue unsalvageable, we may use a procedure known as apexification that seals off the open, cylindrical root end of the tooth. This will allow bone-like tissue to grow around the root to serve as added support for the tooth. Although it can save a tooth in the short run, the tooth’s long-term survival chances may be lower.
By using these and other techniques we may be able to save your child’s immature tooth. At the very least, such a technique could postpone replacing the tooth until a more opportune time in adulthood.
If you would like more information on treating damaged teeth in children, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Saving New Permanent Teeth after Injury.”
Dental implants are among the most popular tooth replacements with their high success rate, durability and life-like beauty. But obtaining them is a process that requires commitment, planning, and coordination — it takes a team.
Your general dentist is often the first team member you’ll encounter: because they’re most familiar with your mouth’s condition the implant discussion naturally begins here. They can help you determine if you’re a good candidate for implants, such as if you have sufficient bone mass at the intended site or if you have dental disease that must be treated first. They’ll also continue monitoring your general dental health throughout the process.
Your general dentist may also have the special training for surgically placing implants. If not, he or she may refer you to your next team member: an oral surgeon or periodontist skilled in implantation procedures. This step first requires careful planning, including developing a surgical guide for precise placement of the implant. These specialists may also contribute to other aspects of the implant process such as tooth extraction or bone grafting.
A few weeks after surgery bone will have grown and adhered to the implant to form a solid bond. It’s time for you to go back to your dentist who will work in conjunction with another member of your team, a dental lab technician. Together, your dentist and laboratory technician will guide the development, manufacture and placement of the implant’s life-like porcelain crown. The technician will take their specifications from the surgeon and your general dentist and, with his or her skill and artistry, form a crown that will blend well in color and shape with the rest of your teeth.
We also can’t forget another important team member: you. Without your input, especially in the early planning stages, your expectations for a more attractive smile might not be met. The rest of your implant team depends on you communicating your desires and wishes to balance with the technical requirements they must achieve.
The process for dental implants can take months. But with the coordinated efforts of your implant team you’ll be able to enjoy results — renewed function and a more attractive smile — that could last for decades.
If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Dental Implants.”
The mark of a great dental restoration is that you can’t see it. It’s there in plain sight, but others observing your new and improved smile can’t tell the difference between the restoration and your natural teeth. Everything looks, well, natural.
That’s the great advantage of dental porcelain. A dental technician with technical skill and artistic flair can form this inorganic, ceramic material into a life-like replica of your tooth, with a shape and color that blends in with the rest of your teeth. And because of its strength properties, porcelain restorations can hold up to the normal chewing and biting forces in your mouth, as long as you use prudence when biting down on hard substances.
Porcelain is also highly adaptable to different kinds of restorations. For natural teeth still viable but no longer attractive, porcelain can be the main ingredient in two very popular and effective restorations, the veneer and the crown. Although the porcelain material is the same for both, their construction and application are quite different.
Veneers are very thin laminated layers of dental porcelain custom-colored and shaped for bonding to the outer visible portion of a tooth. They’re a great solution for relatively decay-free teeth that have minor to moderate defects like chipping, slight misalignment or heavy staining. They often require some permanent removal of tooth enamel to ensure their appearance isn’t too bulky, but causes minimal impact to the tooth.
Crowns, on the other hand, are complete tooth replicas that are bonded in place over an existing tooth like a cap. They’re a good choice for teeth in which the root and inner layers are still viable, but the tooth has been significantly damaged by decay or trauma. They’re also useful as a protective cover for teeth that have undergone root canal treatment. But unlike the minimal impact of veneers, crowns require significant tooth alterations to accommodate them.
In either case, though, the end result is much the same: both crowns and veneers can be fashioned to precisely mimic the shape, color and texture of natural teeth. In skillful hands, these porcelain restorations can transform your smile for the better and no one but you and your dentist will ever need to know.
If you would like more information on porcelain restorations, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Porcelain Crowns & Veneers.”
First introduced in the 1980s, dental implants are a popular and reliable tooth replacement option. Numerous studies show that after ten years 95% are still in place. Much of this success owes to the implant’s titanium post imbedded directly into the jaw, which then attracts bone growth. This additional growth securely anchors the implant in place for an unrivaled durability among other replacement options.
Still, a small percentage of implants fail — some in the first few months and others after a few years. Here are 3 reasons why, and how you can overcome them.
Poor bone quantity and quality. Implants need a certain amount of existing bone to succeed. Sometimes, though, there isn’t enough because prolonged absence of a tooth causes bone loss around the empty socket. Conditions like diabetes, osteoporosis or tobacco use can also compromise bone health. It’s often possible to increase bone volume with grafting, especially right after tooth extraction.
Teeth grinding habits. This occurs when you unconsciously grind or clench your teeth, usually during sleep. The habit can create forces far in excess of what’s normal when we bite or chew and can damage or even break the crown attached to an implant. Besides reducing stress (a major factor for teeth grinding), you can also alleviate the abnormal force generated by wearing a night guard.
Periodontal (gum) disease. Although your implants are impervious to disease or infection, supporting gums and bone aren’t. Plaque, a film of food and bacteria that builds up on tooth surfaces, can cause gum disease that weakens the supporting tissues (gums and bone) of the implant. This can give rise to a specific condition with implants known as peri-implantitis where the infected gum tissues and bone around it deteriorate, leading to the implant’s catastrophic loss. To avoid this, practice consistent daily hygiene, including around the implant. And see us regularly for checkups and cleanings, or as soon as possible if you see signs of gum problems.
If you would like more information on dental implants, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Dental Implants: A Tooth-Replacement Method that Rarely Fails.”
Although dental disease prevention has made great strides over the last century, tooth decay and periodontal (gum) disease continue to pose a major health threat. People who’ve lost all of their teeth (edentulism) or most of them suffer the most with adverse effects on their overall health, function and appearance.
Removable dentures have been the traditional and most affordable means to treat edentulism. But even with material and construction advances in recent years, dentures can still lose their fit over time as the bone in the jaw shrinks. This happens because the bone no longer has the stimulus of natural teeth and older cells can’t be replenished at a healthy rate; the continuing compression of traditional dentures on the jaw’s bony ridges compounds the problem.
As the bone shrinks the dentures become loose and uncomfortable to wear. Among other results, this poor fit can drastically affect how you eat: studies of denture wearers have found a decrease in their diet’s nutritional value because they’re eating fewer vegetables or fibrous, “chewy” foods and more foods with refined carbohydrates and fats that are easier to eat but less nutritious.
There is an alternative, though, that might slow bone loss and provide a better long-term fit: an overdenture supported by dental implants. With this appliance, a few implants are strategically installed in the upper or lower jaw. Matched attachments securely fasten the denture to the implants. In this case, the implants not the jaw ridge and gums support the denture thereby preserving the bone.
If you’re healthy enough to undergo a tooth extraction, you should be able to handle implant surgery, a minor procedure usually performed with local anesthesia and with little to no discomfort afterward. It may even be possible to retrofit your current denture to work with the implants, but that will need to be determined during the planning stages.
Although more expensive than a traditional denture, overdentures are much more affordable than fixed restorations stabilized with implants. The difference, though, is the increase in your quality of life — for better nutrition, physical health and social confidence.
If you would like more information on treatment for teeth loss, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Implant Overdentures for the Lower Jaw.”