Posts for category: Dental Procedures
FAQs About This New and Miraculous Procedure
How can sinus surgery contribute to the replacement of missing back teeth with dental implants?
Dental implants must be anchored the in bone to be successful. Maxillary sinus surgery can help regenerate bone that has been lost and is critically needed to anchor dental implants.
What are the maxillary air sinuses?
Inside the upper jaw, or “maxilla,” are structures known as the maxillary air sinuses, one on either side of the upper jaw. Each sinus is an air-filled space lined by a membrane. Upper back teeth are normally encased in the bone of the maxilla, below the sinuses.
Why is it important to replace missing back teeth?
Replacing back teeth restores the ability to eat, chew, and talk properly. The back teeth also provide facial and cheek support.
Why use dental implants?
Dental implants are the state-of-the-art method for replacing missing teeth.
Why does bone loss occur?
Unless special precautions are taken to prevent it, when teeth are lost, the bone supporting them is also lost.
If there is insufficient bone to anchor dental implants, what are the alternatives?
If all the back teeth are lost and dental implants cannot be placed, removable upper dentures may be the only alternative.
How do you determine whether a sinus surgical procedure is necessary?
The size, shape, and remaining bone of the maxillary sinuses influence whether you can have dental implants with or without a sinus surgical procedure.
How does surgery grow bone?
A small window is created in the sinus wall above where implants need to be placed. The sinus membrane is lifted and the space thus created filled with bone grafting and biologically active bone generating materials. The window is then closed and simply heals.
How is the surgery done?
The surgical procedures are performed from inside the mouth in the area just above the missing back teeth. They are generally carried out under local anesthesia (small shots, just like for a filling), sometimes with the addition of sedation or anti-anxiety medication.
How do bone grafts work?
Bone grafts act as scaffolds that the body replaces with its own bone. The most well researched bone substitute grafting material is currently bovine (cow) bone. All grafting materials are approved by the Food and Drug Administration. They are specially treated to render them completely sterile, non-contagious, and free of rejection factors.
What can I expect after surgery?
Moderate swelling and discomfort after surgery generally lasts for a few days to a week, about the same as having an upper impacted wisdom tooth removed. Supportive treatment usually includes a course of antibiotics to prevent infection and prescription strength medication of the aspirin or ibuprofen type. A decongestant may also be prescribed, if necessary. Healing is generally uneventful.
Who performs this surgery?
Maxillary sinus augmentations are usually carried out by oral surgeons, periodontists, or appropriately trained general dentists. Proper assessment of your situation and diagnosis are critical pre-requisites to the right procedure.
If you are missing upper back teeth, contact us today to schedule an appointment and discuss maxillary sinus augmentation. You can also learn more about this procedure by reading the Dear Doctor magazine article “Sinus Surgery: Creating Bone for Dental Implants out of Thin Air.”
Modern dentistry offers several great ways to permanently replace missing teeth, including high-tech dental implants and traditional fixed bridgework. But sometimes, for one reason or another, it isn’t possible to have these treatments done right away. If you need an aesthetic way to temporarily replace missing teeth, a flexible partial denture could be the answer you’re looking for.
Certain kinds of removable partial dentures (RPDs) can be used as permanent tooth replacement systems, especially for people who aren’t candidates for dental implants or fixed bridges. But in the past, if you needed a temporary tooth replacement, one of the few alternatives was the type of rigid RPD often called a “flipper.” This consists of a firm, relatively thick acrylic base that supports one or more lifelike replacement teeth. It attaches to the “necks” of existing natural teeth via metal clasps, which gives it stability and strength.
However, the same rigidity and thickness that gives these rigid RPDs their durability can make them uncomfortable to wear, while the acrylic material they are made of is capable of staining or breaking. Over time, the RPDs are prone to coming loose — and they are also easy to flip in and out with the tongue, which gives them their nickname.
Flexible partial dentures, by contrast, are made of pliable polyamides (nylon-like plastics) that are thin, light and resistant to breakage. Instead of using metal wires to attach to the teeth, flexible RPDs are held securely in place by thin projections of their gum-colored bases, which fit tightly into the natural contours of the gumline. Their elasticity and light weight can make them more comfortable to wear. Plus, besides offering aesthetic replacements for missing teeth, their natural-looking bases can cover areas where gums have receded — making existing teeth look better as well.
All RPDs must be removed regularly for thorough cleaning — but it’s especially important for flexible RPD wearers to practice excellent oral hygiene. That’s because the projections that hold them in place can also trap food particles and bacteria, which can cause decay. And, like most dentures, RPDs should never be worn overnight. Yet with proper care, flexible RPDs offer an inexpensive and aesthetic way to temporarily replace missing teeth.
If you cringe at the appearance of your less than pearly whites when you look in the mirror, you are not alone. A frequently requested cosmetic procedure, teeth whitening is a very successful and relatively inexpensive way to enhance your smile. We can determine which whitening treatment will work best for you after performing a basic oral examination in our office. When will it work and when won't it? Here's some background:
Teeth most commonly become stained or discolored due to surface (extrinsic) changes, the most common of which are dietary and smoking. Foods including red wine, coffee, and tea can cause extrinsic staining. Teeth can also commonly become discolored or stained due to intrinsic (internal) reasons, such as changes in the structure of enamel or dentin or by incorporation of chromogenic (color generating) material into tooth tissue during formation or after eruption.
- Toothpastes that claim to whiten teeth are only effective in removing plaque and other surface stains. Although most of these products contain mild abrasives that remove the plaque, they aren't capable of changing the underlying color of stained teeth.
- Tooth polishing by your dentist or dental hygienist is effective in removing superficial staining, but will not change tooth color.
- Teeth whitening systems work by bleaching, generally with the use of hydrogen peroxide. Using bleaching gels in custom made trays or whitening strips can be done at home, but is slow and the changes are gradual. We can perform quicker and more effective “power bleaching” in our dental office when precautions can be taken to ensure safety due to the higher concentrations of bleaching gels used. Teeth with intrinsic (internal) staining may need internal bleaching to whiten them and this can only be done in the dental office.
- Teeth whitening results fade over time, but optimally last from six months to two years. Taking care of your newly whitened teeth by avoiding the foods, beverages, and habits that cause staining will help them remain whiter for longer.
- If you have had previous cosmetic dentistry performed, including the placement of composite restorations, porcelain veneers, or crowns, teeth whitening may not be for you. Bleaching agents have little to no effect at all on the materials used to create these restorative products.
If you would like to discuss whitening your teeth with us, call today to make an appointment. To learn more about the various teeth whitening procedures, read the Dear Doctor magazine article “Teeth Whitening: Brighter, Lighter, WhiterÃ¢Â€Â¦”
You may be considering dental implants for a lot of reasons: durability, functionality and imperviousness to decay. But perhaps the winning reason is how they will make you look — their life-like quality can restore a smile marred by missing or disfigured teeth. Achieving that result, though, requires your dental team to determine beforehand the state of your bone and gums, and treat any conditions that would interfere with the final result.
The first area to look at is the amount of bone available to support the implant. An adequate amount is necessary not only to stabilize the implant, but to also ensure proper placement needed to achieve the best “smile” result. Your specialist, then, will take steps to protect available bone during procedures, or even aid in building up the bone structure by inserting grafting materials that encourage new bone growth.
The degree of bone volume in adjacent natural teeth is also important because it can greatly affect the health of the papillae. This is the triangular-shaped gum tissue that occurs between each tooth that gives normal teeth their arched appearance. Insufficient bone in these areas could cause the papillae not to regenerate properly around the implant site, which creates unsightly dark spaces in the gum tissue known as “black hole disease.”
We must next consider the quality and health of your gum tissue. Patients whose gum tissue tends to be thin face difficulties during cosmetic surgical procedures; their thinner tissues are also more prone for objects behind them to be visible, including metal or other crown materials.
Our aim is an implant crown emerging from the surrounding gum tissue just as a natural tooth would. To achieve this requires knowing first what we have to work with regarding your bone and gums, and to address any issues that are problematic. One aid in this process is to affix a temporary “prototype” crown on the implant to wear while the permanent crown is manufactured. This allows you to “test-drive” the new look, and make adjustments in the final product regarding color and materials.
Accounting for all these factors — and then making adjustments along the way — will help ensure the final crown meets your expectations for function and appearance.
If you would like more information on the fabrication of implant crowns, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Matching Teeth & Implants.”
Dental implants are a great choice for many people who need to permanently replace a missing tooth. Reliable and long-lasting, they offer a highly successful outcome, and can even help reduce long-term bone loss and damage to adjacent teeth. One of the best features of implants is that the titanium metal of which they're made actually becomes fused with your natural, living bone tissue.
But sometimes, an examination may show that where you have missing teeth, you may not have enough bone remaining to properly place an implant. Does this mean you're out of luck? Not necessarily!
Employing the refined techniques of bone grafting, regenerating bone tissue has become a standard procedure in periodontal and oral surgery. In many cases, it's possible to build up just the right amount of bone using a variety of grafting materials, in combination with other special techniques. This can enable patients who wouldn't otherwise be good candidates to enjoy the benefits of dental implants.
How does it work? Basically, by helping your body repair itself.
You may already know that bone is a living tissue, which can respond to its environment positively (by growing) or negatively (by resorbing or shrinking). When you've lost bone tissue, the trick is to get your body to grow more exactly where you want it. Once we know where — and how much — replacement bone is needed, we can place the proper amount of bone grafting material in that location. Then, in most cases, the body will use that material as a scaffold to regenerate its own bone.
Bone grafting is often done at the time of tooth removal as a preventive procedure or prior to the placement of an implant, to give the body time to re-grow enough of its own tissue. The procedure is generally carried out under local anesthesia, or with the aid of conscious sedation. Sometimes, if there is enough natural bone to stabilize it, it's even possible to place an implant and perform a bone graft at the same time.
So if you're considering dental implants, let us advise you on what's best for your particular situation. We have the knowledge and experience to help you make the right choices, and achieve the most successful outcome.
If you would like more information about bone grafting, please contact us or schedule an appointment for a consultation. You can learn more in the Dear Doctor magazine article “Can Dentists Rebuild Bone?”